Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 154)

122 Network OS NETCONF Operations Guide
53-1003231-02
Zone configuration management
10
cfg-save
Enabling a zone configuration
Only one zone configuration can be enabled. This procedure selects a configuration from the
defined configuration and makes it the enabled configuration. This procedure replaces the
currently enabled configuration, if one exists.
In addition to enabling the specified configuration, this procedure also saves any changes made to
the zoning database in volatile memory to nonvolatile memory. This saved configuration will persist
following reboot.
To enable a zone configuration, issue an RPC to configure the
/ node in the urn:brocade.com:mgmt:brocade-zone namespace
and specify the configuration you want to enable in the element.
If the configuration refers to a nonexistent zone or a zone with no members assigned to it, the
operation fails and the returns an error.
The following example enables cfg3.
?xml version="1.0" encoding="UTF-8"?>
cfg3
If the configuration you are trying to enable contains a zone with no member, the server will return
an with an error similar to the following message.
application