Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 320)

288 Network OS NETCONF Operations Guide
53-1003231-02
VLAN configuration and management
21
Disabling a VLAN on a trunk interface
To disable a VLAN on a trunk interface, perform the following steps.
1. Issue an RPC to configure the node in the
urn:brocade.com:mgmt:brocade-interface namespace.
2. Under the node, specify the interface type element (,
, , or ).
3. Under the , , , or
element, include the following elements.
a. In the element, specify the port name in [rbridge-id/]slot/port format.
b. In the element, include the delete operation in the element opening tag to
enable the interface port.
c. Include the / hierarchy of node elements.
d. Under the node, specify the element, and specify “trunk” to place
the interface into trunk mode.
22/0/1
operation="delete"/>
trunk
4. Issue an additional RPC to remove the VLAN ranges from the trunk port.