Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 323)

Network OS NETCONF Operations Guide 291
53-1003231-02
Configuring protocol-based VLAN classifier rules
21
1. Issue an RPC to configure the node in the
urn:brocade.com:mgmt:brocade-vlan namespace.
2. Under the node, specify the / hierarchy of node elements.
3. Under the element, specify the element, and give it an integer representing
the rule ID.
4. Under the element, specify the node element.
5. Under the node element, include an
5
Creating a VLAN classifier group and adding rules
VLAN classifier groups (1 through 16) can contain any number of VLAN classifier rules.
To configure a VLAN classifier group and add a VLAN classifier rule, perform the following steps.
1. Issue an RPC to configure the node in the
urn:brocade.com:mgmt:brocade-vlan namespace.
2. Under the element, specify the / hierarchy of node elements.
3. Under the element, specify the following leaf elements.
a. In the element, set an integer value to identify the classifier group.
b. In the element, specify the value “add” to add the specified rule.
c. In the element, specify the value “Rule”.
d. In the element, set to an integer value that identifies the rule you want to add.
The following example creates classifier group 1 and adds rule 1 to it.