Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 574)

542 Network OS NETCONF Operations Guide
53-1003231-02
Configuring the track priority
35
The procedure for configuring track priority differs depending on the Ethernet link interface type,
which for VRRP can be a physical Ethernet link (10 Gigabit Ethernet, Gigabit Ethernet, 40 Gigabit
Ethernet), port-channel, or VE. For VRRP-E, the Ethernet link interface type must be VE.
Configuring track priority for physical Ethernet or port-channel
To configure the track priority for a physical Ethernet link or port-channel, perform the following
steps.
1. Issue the RPC to configure the node in the
urn:brocade.com:mgmt:brocade-interface namespace.
2. Under the node, specify the , ,
, , or node, depending on the
Ethernet link interface type.
3. Under the , , ,
, or node, include the element and specify
the name of the backup router interface.
4. Under the , , ,
, or node, include the node element located
in the urn:brocade.com:mgmt:brocade-vrrp namespace.
5. Under the node, include the element and specify the group ID of the VRRP router
group.
6. Under the node, include the node element.
7. Under the node, include the following leaf elements.
a. In the element, specify the type of interface to be tracked. This type can
be gigabitethernet, tengigabitethernet, fortygigabitethernet, hundredgigabitethernet, or
port-channel.
b. In the element, specify the name of the interface to be tracked in
[rbridge-id/]slot/port format or port-channel number.
c. In the element, specify the reduction in priority that the interface specified
in step 3 will have if the tracked interface goes down.
The following example reduces the priority of interface 101/1/6 by 60 if interface 2/4 goes down.
101/1/6
1
tengigabitethernet
2/4
60