Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 374)

342 Network OS NETCONF Operations Guide
53-1003231-02
Spanning tree configuration and management
24
Specifying the bridge forward delay for all xSTP
For any spanning tree mode (STP, RSTP, MSTP, PVST, or Rapid PVST), use this procedure to specify
how long an interface remains in the listening and learning states before the interface begins
forwarding all spanning tree instances.
The range is 4 through 30 seconds. The default is 15 seconds. The following relationship should be
kept:
2*(forward_delay - 1)>=max_age>=2*(hello_time + 1)
To specify the bridge forward delay, perform the following steps.
1. Issue the RPC to configure the node in the
urn:brocade.com:mgmt:brocade-interface namespace.
2. Under the node, include the node from the
urn:brocade.com:mgmt:brocade-xstp namespace.
3. Under the node, include the , , , , or node
element.
4. Under the , , , , or node, include the leaf
element, and specify the bridge forward delay.
20