Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 422)

390 Network OS NETCONF Operations Guide
53-1003231-02
Enabling and disabling LLDP
27
To enable LLDP globally, perform the following steps.
1. Issue the RPC to configure the node in the
urn:brocade.com:mgmt:brocade-interface namespace.
2. Under the node, include the node element from the
urn:brocade.com:mgmt:brocade-lldp namespace to enable LLDP.
The node element contains elements that allow you to configure the global LLDP
parameters. However, the “presence=true” statement that qualifies the container
definition in the brocade-lldp.yang file allows the node element to also function as a leaf
element.
The following example enables LLDP globally.
Disabling and resetting LLDP globally
Resetting LLDP globally returns all configuration settings made under the / node
to their default settings. LLDP is enabled globally by default.
Disabling LLDP disables LLDP globally.
To reset LLDP globally, perform the following steps.
1. Issue the RPC to configure the node in the
urn:brocade.com:mgmt:brocade-interface namespace.
2. Under the node, include the node element from the
urn:brocade.com:mgmt:brocade-lldp namespace, and include the delete operation in the
element tag.
The following example resets LLDP globally.
xmlns="urn:ietf:params:xml:ns:netconf:base:1.0"