Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 282)

250 Network OS NETCONF Operations Guide
53-1003231-02
Configuring AMPP port-profiles
19
4. In the node in the urn:brocade.com:mgmt:brocade-port-profile namespace,
activate the FCoE port profile.
An FCoE map cannot be applied on interfaces that already have a CEE map applied to them.
default
default
Configuring QoS profiles
QoS profiles define the following values:
• Incoming 802.1p priority is set to internal queue priority. If the port is in QoS untrusted mode,
all incoming priorities will be mapped to default best effort priority.
• Incoming priority is set to outgoing priority.
• Mapping of incoming priorities is set to strict or WRR traffic classes.
• Enabling of flow control on a strict or a WRR traffic class.
The QoS profile has two flavors: CEE QoS and Ethernet QoS. The QoS profile may contain either CEE
QoS or Ethernet QoS. Server-side ports typically are carrying converged traffic.
To configure the QoS profile, perform the following steps.
1. Deactivate the port-profile before modifying the VLAN profile.
AMPP profiles cannot be modified while active.
xmlns="urn:brocade.com:mgmt:brocade-port-profile">
vm1-port-profile