Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 416)

384 Network OS NETCONF Operations Guide
53-1003231-02
LACP configuration and management
26
2
2
10
100
10
src-dst-mac-vid
20
dst-mac-vid
LACP configuration and management
NOTE
To save the configuration, use the RPC to copy the running configuration to the
startup configuration.
Enabling LACP on a DCB interface
To add interfaces to an existing LAG, repeat this procedure using the same LAG group number for
the new interfaces.
To enable LACP on a DCB interface, perform the following steps.
1. Issue the RPC to configure the node defined in the
urn:brocade.com:mgmt:brocade-interface namespace, and specify the following elements.
2. Under the node, specify the , ,
, or node element.