Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 401)

Network OS NETCONF Operations Guide 369
53-1003231-02
Configuring all xSTP on DCB interface ports
24
22/0/1
operation="delete"/>
100
32
Restricting the port from becoming a root port (MSTP)
Use this procedure to restrict a port from becoming a root port. The default is to allow the DCB
interface to become a root port. This procedure affects MSTP only.
To restrict the DCB interface from becoming a root port, perform the following steps.
1. Issue the RPC to configure the interface node in the
urn:brocade.com:mgmt:brocade-interface namespace.
2. Under the node, include the , ,
, , or node element.
3. Under the , , ,
, or node element, include the following elements.
a. In the element, specify the interface name in [rbridge-id/]slot/port format or
port-channel number.
b. In the element, include the delete operation in the element tag to enable the
port.
c. Include the node element, which resides in the
urn:brocade.com:mgmt:brocade-xstp namespace.
4. Under the node, include the empty leaf element.
22/0/1