Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 340)

308 Network OS NETCONF Operations Guide
53-1003231-02
VXLAN configuration and management
22
Configuring the NSX Controller
Prerequisite steps
Before you configure the NSX controller, complete the task in “Configuring the VXLAN Gateway”
on page 304. The purpose of this task is to generate the security certificate for the VXLAN
gateway. This procedure uses data shown in
Figure 4 .
1. Issue the RPC to edit the running configuration.
2. Access the container within the brocade-tunnels RPC with the name
controller1.
controller1
3. Within the container and the node, set the element values for the
container as listed below:
• Set the
• Set the element to ssl.
• Set the element to 6632.
controller1
6632
ssl