Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 436)

404 Network OS NETCONF Operations Guide
53-1003231-02
Configuring LLDP interface-level options
27
1. Issue the RPC to configure the node in the
urn:brocade.com:mgmt:brocade-interface namespace.
2. Under the node, include a , ,
, or node element.
3. Under the , , , or
node, include a element to identify the interface in
[rbridge-id/]slot/port format.
4. Under the , , , or
node, include an node element, which resides in the
urn:brocade.com:mgmt:brocade-lldp namespace.
5. Under the node, include the element and specify the name of the LLDP profile
you want to apply to the interface.
6. Under the node, include the element to configure the DCBX version for
an interface for DCB. For detailed information on these version keywords, refer to the Network
OS Administrator’s Guide. The default is to automatically detect the DCBX version.
The following example applies an LLDP profile named network_standard to interface 22/0/1.
22/0/1
network_standard
cee
(more interfaces go here)