Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 601)

Network OS NETCONF Operations Guide 569
53-1003231-02
Configuring DHCP Relay
39
DHCP server and client interface on different VRF instances
If the DHCP server is on a different Virtual Routing and Forwarding (VRF) instances than the
interface where the client is connected, use the node.
NOTE
If the node is not used, it is assumed that the DHCP server and client interface
are on the same VRF instance.
1. Issue the RPC to configure the node in the
urn:brocade.com:mgmt:brocade-interface namespace.
2. Under the node, include the , ,
, , or node element.
3. Under the , , ,
, or node, include the element and set its
value to the name of the interface for which you want to configure user-priority mappings.
4. Under the , , ,
, or node, include the element located in
the urn:brocade.com:mgmt:brocade-dhcp namespace.
5. Set the node to the IP address for the DHCP server.
6. Set the node to the VRF name.
1/3/1
100.1.1.2
blue