Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 429)

Network OS NETCONF Operations Guide 397
53-1003231-02
Configuring LLDP global options
27
Configuring the advertisement of LLDP DCBX-related TLVs
For a switch in standalone mode, only the DCBX TLV is advertised by default.
For a switch in Brocade VCS Fabric mode, the following TLVs are advertised by default:
• dcbx-tlv
• dcbx-fcoe-app-tlv
• dcbx-fcoe-logical-link-tlv
To configure the LLDP DCBX-related TLVs to be advertised, perform the following steps.
1. Issue the RPC to configure the node in the
urn:brocade.com:mgmt:brocade-interface namespace.
2. Under the node, include the node element, which resides in the
urn:brocade.com:mgmt:brocade-lldp namespace.
3. Under the node, include the node element.
4. Under the node, include elements that specify the TLVs you want advertised:
•
•
•
•
•
The following example advertises all the DCBX-related TLVs.