Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 403)

Network OS NETCONF Operations Guide 371
53-1003231-02
Configuring all xSTP on DCB interface ports
24
Enabling spanning tree
To enable spanning tree on the DCB interface, perform the following steps.
1. Issue the RPC to configure the interface node in the
urn:brocade.com:mgmt:brocade-interface namespace.
2. Under the node, include the , ,
, , or node element.
3. Under the , , ,
, or node element, include the following elements.
a. In the element, specify the interface name in [rbridge-id/]slot/port format or
port-channel number.
b. In the element, include the delete operation in the element tag to enable the
port.
c. Include the node element, which resides in the
urn:brocade.com:mgmt:brocade-xstp namespace.
4. Under the node, include the empty leaf element, and include the
delete operation in the element tag to enable spanning tree on the port.
22/0/1
operation="delete"/>
operation="delete"/>