Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 457)

Network OS NETCONF Operations Guide 425
53-1003231-02
Queueing
29
4. Under the node, include the following elements.
a. In the element, assign a name to the map.
b. In each successive n> element, associate each inbound CoS value to an output CoS
value.
For example, the following element maps outbound CoS value to 3 for all packets with
inbound CoS value of 3.
3
5. Issue the RPC to save the running-config file to the startup-config file.
The following example creates a CoS-to-CoS mutation QoS map named “test.”
test
0
1
2
3
4
5
6
7
Applying a CoS-to-CoS mutation QoS map to an interface
To apply a CoS-to-CoS mutation QoS map, perform the following steps.
1. Issue the RPC to configure the node in the
urn:brocade.com:mgmt:brocade-interface namespace.
2. Under the node, include a node element to specify the interface type;
, , , ,
or .
3. Under the node element designating the interface type, include the leaf element and
specify the name of the interface to which you want to apply the map.
4. Under the node element designating the interface type, include the node element,
which is located in the urn:brocade.com:mgmt:brocade-qos namespace.