Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 368)

336 Network OS NETCONF Operations Guide
53-1003231-02
Configuring MSTP
24
4. Under the node, include the node element and specify an MSTP region.
For more details, refer to “Specifying a name for an MSTP region” on page 353.
5. Under the node, include the element and specify a revision number for the
MSTP configuration.
For more details, refer to “Specifying a revision number for MSTP configuration” on page 354.
6. Under the node, specify an node for each MSTP instance you want to
configure.
7. Under each node, specify the following leaf nodes.
a. In the element, specify the instance ID.
b. In the element, specify the VLANs to be included in this MSTP instance.
c. In the element, specify the instance priority.
For more details, refer to “Mapping a VLAN to an MSTP instance” on page 352.
8. Under the node, include the leaf element and specify the maximum hops
for a BPDU to prevent the messages from looping indefinitely on the interface.
For more details, refer to “Specifying the maximum number of hops for a BPDU (MSTP)” on
page 353.
9. Issue the RPC to save the running config file to the startup config file and
save the configuration changes.
brocade1
1
1
2,3
4096
2
4-6
25