Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 58)

26 Network OS NETCONF Operations Guide
53-1003231-02
Disabling or enabling a chassis
3
27
lab1_vdx0023
lab1_vdx0023
Obtaining host attribute information
To return the configured host attribute information, issue the RPC with a subtree filter
to return only the information under the / node in the
urn:brocade.com:mgmt:brocade-ras namespace, as shown in the following example. Include the
leaf element under the node to restrict output to a specific switch.
27
27
lab1_vdx0023
lab1_vdx0023
Disabling or enabling a chassis
By default, the chassis is enabled after power is turned on and diagnostics and switch initialization
routines have finished. All interfaces are online. You can disable and re-enable the chassis as
necessary.
• Disable the chassis if you want to take all interfaces offline. If the switch was part of an
Ethernet fabric, the fabric reconfigures.