Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 181)

Network OS NETCONF Operations Guide 149
53-1003231-02
Alert notifications
12
Configuring e-mail alerts
Use this procedure to configure e-mail recipients of FRU alerts. For an e-mail alert to function
correctly, add the IP addresses and host names to the Domain Name System (DNS) and configure
the domain name and name servers.
1. Issue the RPC to configure the node in the
urn:brocade.com:mgmt:brocade-system-monitor namespace.
2. Under the node, include the node element.
3. Under the node, include the empty element.
4. Under the node, include an node element for each intended e-mail recipient
of FRU alert notifications.
5. Under each node element, include an leaf element and specify the e-mail
address of an intended recipient.
6. Under the node, include the node element.
The following example configures an e-mail recipient of FRU alert notifications.
xmlns="urn:brocade.com:mgmt:brocade-system-monitor">
[email protected]
Forwarding e-mail messages to a relay server
This procedure allows the sendmail agent on the switch to resolve the domain name and forward
all e-mail messages to a relay server.