beautypg.com

Deleting a span connection from a session – Brocade Network OS NETCONF Operations Guide v4.1.1 User Manual

Page 529

background image

Network OS NETCONF Operations Guide

497

53-1003231-02

Deleting a SPAN connection from a session

32

Deleting a SPAN connection from a session

To remove a single connection from a SPAN session, perform the following steps.

1. Issue the RPC to configure the node in the

urn:brocade.com:mgmt:brocade-span namespace.

2. Under the node, include the node.

3. Under the node, include the following leaf elements.

a. In the field, identify the session with a unique session number.

b. Optional: In the field, provide a descriptive text for the session.

4. Under the node, include the node element and include the

delete operation in the element tag.

5. Under the element, provide the parameters of the existing command.

a. In the element, specify “source” to designate subsequent parameters as

pertaining to the source port.

b. In the element, specify “tengigabitethernet”,

“fortygigabitethernet”, or “gigabitethernet”, depending on the source port type.

c. In the element, specify the source port in

[rbridge-id/]slot/port format.

d. In the element, specify “destination” to designate subsequent parameters

as pertaining to the destination port.

e. In the element, specify “tengigabitethernet”.

f.

In the element, specify the destination port in
[rbridge-id/]slot/port format.

g. In the element, specify “rx” to configure ingress SPAN.

1

Hello Wrold