Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 520)

488 Network OS NETCONF Operations Guide
53-1003231-02
Interface-specific administrative tasks for sFlow
31
1/0/16
35
8192
Disabling sFlow on specific interfaces
NOTE
Disabling sFlow on the interface port does not completely shut down the network communication on
the interface port.
To disable sFlow on a specific interface, perform the following steps.
1. Issue the RPC to configure the node in the
urn:brocade.com:mgmt:brocade-interface namespace.
2. Under the node, specify the , ,
, or node element.
3. Under the , , , or
node, include the leaf element and specify the interface on which
you want to disable sFlow. Specify the interface in the [rbridge-id/]slot/port format.
4. Under the , , , or
node, include the node element located in the
urn:brocade.com:mgmt:brocade-sflow namespace.
5. Under the node, include the empty element and specify the delete
operation in the element tag to disable sFlow on the interface.
The following example disables sFlow on 10-gigabit Ethernet port 1/0/16.
1/0/16
operation="delete"/>