Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 288)

256 Network OS NETCONF Operations Guide
53-1003231-02
Configuring AMPP port-profiles
19
0050.56bf:0002
vm1-port-profile
0050.56bf:0003
vm1-port-profile
0050.56bf:0004
vm1-port-profile
0050.56bf:0005
Disassociating a port-profile from a MAC address
A significant step in creating a port-profile is associating the port-profile with the MAC address of
host. In the event a MAC address must be changed, perform this task for the port profile, and then
repeat the steps for associating the port-profile to the MAC address. Refer to
“Configuring VLAN
profiles” , “Configuring FCoE profiles” , “Configuring QoS profiles” , and “Configuring security
profiles” .
NOTE
You may delete multiple MAC addresses from a single port-profile in a NETCONF cal.
1. Issue the RPC to configure the node in the
urn:brocade.com:mgmt:brocade-port-profile namespace.
2. In the element, specify the port-profile you want to modify,
3. In the element, include the delete operation in the opening tag.
4. Specify you want to delete.