Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 513)

Network OS NETCONF Operations Guide 481
53-1003231-02
Interface-specific administrative tasks for 802.1x
30
Disabling 802.1x on specific interface ports
To disable 802.1x authentication on a specific interface port, perform the following steps.
1. Issue the RPC to configure the node in the
urn:brocade.com:mgmt:brocade-interface namespace.
2. Under the node, specify the , ,
, or node element.
NOTE
You cannot configure 802.1x authentication on a port-channel.
3. Under the , , , or
node, include the leaf element and specify the name of
the interface on which you want to disable 802.1x authentication. Specify the interface in
[rbridge-id/]slot/port format.
4. Under the , , , or
node, include the node element from the
urn:brocade.com:mgmt:brocade-dot1x namespace.
5. Under the node, include the empty leaf element, and include the
delete operation in the element tag to disable 802.1x authentication for the port interface.
6. Issue the RPC to save the running-config file to the startup-config file.
The following example disables 802.1x authentication on interface 22/0/1.
22/0/1
xmlns="urn:ietf:params:xml:ns:netconf:base:1.0"
operation="delete">