Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 189)

Network OS NETCONF Operations Guide 157
53-1003231-02
Interface monitoring
12
Applying security monitoring policies
This procedure allows you to toggle between default settings and saved custom configuration
settings and to apply actions and thresholds separately. For example, you can choose to use
default threshold settings together with a customized subset of available actions, or you can modify
some of the threshold settings and use the default action settings.
To apply a custom security monitoring policy, perform the following steps.
1. Issue the RPC to configure the node in the
urn:brocade.com:mgmt:brocade-threshold-monitor workspace.
2. Under the node, include the /
hierarchy of node elements.
3. Under the node, include the leaf element, and specify the custom policy.
switch(config)# threshold-monitor security apply custom
xmlns="urn:brocade.com:mgmt:brocade-threshold-monitor">
custom
Interface monitoring
System Monitor monitors error statistics on all external Gigabit Ethernet interfaces: 1 Gb, 10 Gb,
and 40 Gb. When any monitored error crosses the configured high or low threshold, an alert is
generated.
Monitored errors include CRC align errors, RX symbol errors, RX IFG violations, and RX abnormal
frame terminations. For details about these interface error types, refer to the Network OS
Administrator’s Guide.