Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 200)

168 Network OS NETCONF Operations Guide
53-1003231-02
RMON configuration and management
14
Configuring RMON alarm settings
To configure RMON alarms and events, perform the following steps.
1. Issue the RPC to configure the node in the
urn:brocade.com:mgmt:brocade-rmon workspace.
2. Under the node, include the node element.
3. Under the node, include the following leaf elements to configure the RMON
alarm.
a. In the element, set the unique index number for the alarm in the range 1
through 65535.
b. In the element, specify a description of the event as a string of up to 35
characters.
c. In the element, specify the RMON alarm sample interval in seconds. The
range of valid values is from 1 through 2,147,483,648.
d. In the field, specify “absolute” or “delta”, depending on the sample type.
Optionally, if you are monitoring a rising threshold:
e. In the element, specify a number in the range 1 through
2,147,483,648.
f. In the element, specify the event by its index number in the
range 1 through 65535.
When monitoring a falling threshold:
g. In the element, specify a number in the range 1 through
2,147,483,648.
h. In the element, specify the event by its index number in the
range 1 through 65535.
4. Issue the RPC to save the running-config file to the startup-config file.
The following example shows an alarm that tests every sample for a rising threshold.
5
1.3.6.1.2.1.16.1.1.1.5.65535
30
absolute
95
27
john_smith