Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 366)

334 Network OS NETCONF Operations Guide
53-1003231-02
Configuring RSTP
24
The port priority range is 0 through 240 in increments of 16. The default is 128. A lower
number designates a higher priority.
22/0/13
operation="delete"/>
32
For details, refer to “Specifying the port priority” on page 367.
9. Optional: Enable the guard root feature on a port.
All other switch ports connected to other switches and bridges are automatically placed in
blocking mode.
Do not apply the guard root to ports connected to workstations or PCs: these ports remain in
the forwarding state.
22/0/1
operation="delete"/>
For detailed information, refer to “Enabling the guard root (STP and RSTP)” on page 360.
10. Issue the RPC to save the running-config file to the startup-config file.
The following example enables RSTP, configures RSTP parameters, configures two interfaces as
edge ports, and designates one interface the root port.
28582
20
25
60