Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 283)

Network OS NETCONF Operations Guide 251
53-1003231-02
Configuring AMPP port-profiles
19
operation="delete"/>
2. Issue the RPC to configure the / node in the
urn:brocade.com:mgmt:brocade-port-profile namespace. Under the node,
configure the following entities.
a. Apply the CEE map.
default
b. Set the default CoS value.
7
c. Set the QoS trust attribute for CoS
d. Apply a map to the profile. You may either apply the existing CoS-to-CoS mutation map, or
apply the existing CoS-to-Traffic-Class map.
The following code snippet applies the existing CoS-to-CoS mutation map:
vm1-cos2cos-map>
The following code snippet applies the existing CoS-to-Traffic-Class map:
vm1-cos2traffic-map
e. Enable pause generation with or without PFC.
The following code snippet enables pause generation without PFC:
on
on