About this document, In this chapter, How this document is organized – Brocade Network OS NETCONF Operations Guide v4.1.1 User Manual
Page 27

Network OS NETCONF Operations Guide
xxvii
53-1003231-02
About This Document
In this chapter
•
•
Supported hardware and software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxix
•
•
•
•
•
How this document is organized
.
This document is organized to help you find the information that you want as quickly and easily as
possible.
contains the following components:
•
provides an overview of the basic features of NETCONF.
•
Chapter 2, “Basic NETCONF Operations”
provides instructions for performing basic NETCONF
operations such as establishing a session, editing the configuration, and retrieving operational
data.
•
Chapter 3, “Basic Switch Management”
provides procedures for connecting to a switch, setting
switch attributes, enabling or disabling a chassis, rebooting, managing slots, modules and
ports, configuring the switch banner, uploading SupportSave data, and managing system logs.
•
Chapter 4, “Network Time Protocol”
provides instructions and examples for using NETCONF
operations to configure NTP servers, and to set the date, time, and time zone on a switch.
•
Chapter 5, “Installing and Maintaining Firmware”
provides preparations and procedures for
performing firmware downloads.
•
Chapter 6, “Administering Licenses”
provides procedures for verifying and activating Brocade
licenses.
•
provides procedures for setting community strings and other SNMP
configurations.
•
provides procedures for configuring fabric parameters.
•
provides procedures for configuring Metro VCS.
•
Chapter 10, “Administering Zones”
provides procedures for administering fabric-based zoning.
•
Chapter 11, “Configuring Fibre Channel Ports”
provides procedures for configuring Fibre
Channel ports.