Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 548)

516 Network OS NETCONF Operations Guide
53-1003231-02
Other routing operations
33
Configuring the default route
The default route is configured with an all zeros prefix/netmask (that is, 0.0.0.0/0). This default
route gets installed in the ASIC. All traffic that does not have other matching routes is forwarded
using the default route.
The following example configures a default route with a next hop of 207.95.6.157.
30
0.0.0.0/0
207.95.6.157
Other routing operations
This section describes some other commonly used route management operations. Refer to the
Network OS YANG Reference Manual for a list of all IP routing-related parameters.
Specifying route attributes
When specifying a route, include leaf elements under the node that let you:
• Specify a tag value of a route to use for route filtering with a route map ( element).
• Specify a cost metric of a route ( element).
The following example sets the cost of a route to 10 and specifies a tag value of 5 for route filtering.
rpc message-id="3303" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">