Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 307)

Network OS NETCONF Operations Guide 275
53-1003231-02
Obtaining FCoE status
20
5
default
Obtaining FCoE status
The following custom RPCs exist for returning FCoE information:
• returns information about FCoE port interfaces
• returns information about logged in FCoE devices
Obtaining FCoE port interface information
To obtain information about FCoE port interfaces, issue the custom RPC
located in the urn:brocade.com:mgmt:brocade-fcoe-ext namespace.
By default, the RPC returns information about all interfaces to which an FCoE
map is applied. To restrict the output to one FCoE interface, include the input
parameter and supply the interface name, for example 1/0/1. To restrict the output to FCoE
interfaces on a specific routing bridge, include the input parameter. To
include statistical data in the output, include the input parameter and set
its value to “true.” To omit the statistic data from the output, set to “false”.
The following example returns FCoE port interface information for port 1/0/1 and requests
statistical information be shown in the output.
1/0/1
true
1/0/1
VF
(output truncated)
Obtaining FCoE login information
To obtain log in information on FCoE devices, issue the custom RPC located in the
urn:brocade.com:mgmt:fcoe-ext namespace.
To provide log in information for all FCoE devices logged in to a specific interface, Virtual Fabric,
VLAN, or routing bridge, include the , , , or
input parameter, respectively.