Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 273)

Network OS NETCONF Operations Guide 241
53-1003231-02
Chapter
19
Configuring AMPP
In this chapter
• AMPP configuration with NETCONF overview . . . . . . . . . . . . . . . . . . . . . . . 241
• Configuring AMPP port-profiles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 241
• Obtaining the AMPP operational data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 261
• Configuring a port-profile-port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 264
• Configuring port-profile-domains . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 266
AMPP configuration with NETCONF overview
This chapter describes procedures for configuring and monitoring port-profiles using NETCONF
interfaces. Refer to the Network OS Administrator’s Guide for the following information:
• Conceptual information about how AMPP port-profiles work
• Conceptual information about how AMPP port-profile-domains work
• How AMPP port-profiles work with vLAG and Switched Port Analyzer (SPAN)
• Scalability information
• What a port-profile contains
• Definitions of port-profile states
Through the NETCONF interface, you can perform the following operations on AMPP:
• Use the RPC to configure AMPP port-profiles.
• Use the RPC to configure the port-profile-domain.
• Use the RPC to validate configuration settings.
• Use the custom RPC to return the current status of AMPP profiles.
• Use the custom RPC to return information about port-profiles to which
interfaces are applied.
The AMPP configuration model is defined in the brocade-port-profile.yang module and the AMPP
custom RPC is defined in the brocade-port-profile-ext YANG module. For details, refer to the
Network OS YANG Reference Manual.
Configuring AMPP port-profiles
This section contains procedures for configuring AMPP port-profiles using NETCONF interfaces.