Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 481)

Network OS NETCONF Operations Guide 449
53-1003231-02
Congestion control
29
Enabling Ethernet Pause
To enable Ethernet Pause, perform the following steps.
1. Issue the RPC to configure the node in the
urn:brocade.com:mgmt:brocade-interface namespace.
2. Under the node, include the , ,
, , or node element.
3. Under the , , ,
, or node, include the leaf element and
specify the name in of the interface for which you want to enable Ethernet Pause
([rbridge-id/]slot/port format or port-channel number).
4. Under the , , ,
, or node, include the node element in the
urn:brocade.com:mgmt:brocade-qos namespace.
5. Under the node, include the / node element
hierarchy.
6. Under the node, include the and
elements, and set their values to “on” or “off,” as desired.
7. Issue the RPC to save the running-config file to the startup-config file.
The following example enables Ethernet Pause for transmit and receive directions on 10-gigabit
Ethernet interface 22/0/1.
22/0/1
on
on