Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 305)

Network OS NETCONF Operations Guide 273
53-1003231-02
Configuring FCoE interfaces
20
default
5. Confirm the changes to the interface using the RPC with a subtree filter to return
only the node information of the 1/0/1 interface.
The output returns the FCoE mapping association for the interface.
1/0/1
1/0/1
default
6. Repeat this procedure for any additional interfaces.
Assigning an FCoE map onto a LAG member
You can assign an FCoE map to a LAG that connects an FCoE Forwarder (FCF) to a Data Center
Bridging (DCB) switch or a FIP Snooping Bridge (FSB) switch. After applying the FCoE map, all
member ports of the LAG carry FCoE traffic.
NOTE
You cannot assign an FCoE map to a vLAG or to redundant LAGs connecting different FCFs from
different VCS Fabrics.