Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 492)

460 Network OS NETCONF Operations Guide
53-1003231-02
Brocade VCS Fabric QoS
29
Configuring Brocade VCS Fabric QoS
To configure the remapping priorities for the Brocade VCS Fabric, perform the following steps.
1. Issue the RPC to configure the node in the
urn:brocade.com:mgmt:brocade-cee-map namespace, and specify the following elements.
a. Under the node, include the element and specify the default CEE
map.
b. Under the node, include the node element.
c. Under the node, include the node element.
d. Under the node, include the leaf element,
and set its value to the desired priority.
The default lossless-priority value is 0.
e. Under the node, include the node element.
f. Under the node, include the leaf element, and
set its value to the desired priority.
The default fabric-priority value is 0.
2. Issue the RPC to configure the node in the
urn:brocade.com:mgmt:brocade-interface namespace.
a. Under the node, include the , ,
, , or node element.
b. Under the , , ,
, or node, include the leaf element,
and set its value to the name of the interface to which you want to apply the CEE map.
c. Under the , , ,
, or node, include the leaf element, and
set its value to “default” to apply the CEE provisioning map to the interface.
3. Issue the RPC to save the running-config file to the startup-config file.
The following example remaps the lossless priority and fabric priority values to 2.
default
2
2