Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 314)

282 Network OS NETCONF Operations Guide
53-1003231-02
VLAN configuration and management
21
Disabling STP on a VLAN
Once all of the interface ports have been configured for a VLAN, you can disable STP for all
members of the VLAN with a single RPC.
To disable STP for a VLAN, perform the following steps.
1. Issue an RPC to configure the node in the
urn:brocade.com:mgmt:brocade-interface namespace.
2. Under the node, specify the / hierarchy of node elements.
3. Under the node element, include the following leaf elements:
a. In the element, specify the VLAN ID.
b. Include the / elements to disable spanning tree on the
specified VLAN.
The following example disables STP on VLAN 1002.
1002
Configuring an interface port as a Layer 2 switch port
To configure the interface as a Layer 2 switch port, perform the following steps.
1. Issue an RPC to configure the node in the
urn:brocade.com:mgmt:brocade-interface namespace.
2. Under the node, specify the interface type element (,
, , or ).
3. Under the , , , or
node element, specify the following elements: