Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 605)

Network OS NETCONF Operations Guide 573
53-1003231-02
Appendix
A
Managing NETCONF
In this appendix
• Viewing NETCONF client capabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 573
• Viewing NETCONF statistics and session information . . . . . . . . . . . . . . . . 574
Viewing NETCONF client capabilities
You can view the NETCONF client capabilities for all active sessions through the NETCONF interface
or using the Network OS CLI. The session-ID, logon name of the user of the NETCONF client
session, host IP address, and login time are always returned. The application vendor name,
application product name, version number, and identity of the client are also returned if these
values were advertized in the client capabilities at the start of the session.
To view NETCONF client capabilities using the CLI, in privilege-exec mode, enter the show netconf
client-capabilities command.
The following example shows two client sessions. The first client session has provided client
capabilities in its message to the server at the start of the session. The second client has
not provided this information.
switch# show netconf client-capabilities
Session Id : 10
User name : root
Vendor : Brocade
Product : Brocade Network Advisor
Version : 9.1.0 Build 123
Client user : admin-user
Host IP : 10.24.65.8
Login time : 2011-08-18T08:54:24Z
Session Id : 11
User name : root
Vendor : Not Available
Product : Not Available
Version : Not Available
Client user : Not Available
Host IP : 10.24.65.8
Login time : 2011-08-18T08:54:24Z
To obtain NETCONF client capabilities using the NETCONF interface, issue the
custom RPC located in the
urn:brocade.com:mgmt:brocade-netconf-ext namespace.
xmlns="urn:brocade.com:mgmt:brocade-netconf-ext"/>