Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 474)

442 Network OS NETCONF Operations Guide
53-1003231-02
Queueing
29
test
1,3,5,7
3
11,13,15,17
5
12,14,16,18
6
2,4,6,8
7
Applying DSCP-to-Traffic-Class mapping to an interface
To apply a CoS-to-Traffic Class mapping to an interface, perform the following steps.
1. Issue the RPC to configure the node in the
urn:brocade.com:mgmt:brocade-interface namespace.
2. Under the node, include the , ,
, , or node element.
3. Under the , , ,
, or node, include the interface on which you want to
activate the mapping in the leaf element.
4. Under the , , ,
, or node, include the node element from the
urn:brocade.com:mgmt:brocade-qos namespace.
5. Under the node, include the element, and specify the name of the
DSCP-to-Traffic-class map you want to activate.
6. Issue the RPC to save the running-config file to the startup-config file.
The following example activates a CoS-to-Traffic-Class mapping on 10-gigabit Ethernet interface
22/0/2.