Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 367)

Network OS NETCONF Operations Guide 335
53-1003231-02
Configuring MSTP
24
custom
5
22/0/10
operation="delete"/>
22/0/11
operation="delete"/>
22/0/13
operation="delete"/>
32
Configuring MSTP
The basic process for configuring MSTP is as follows.
1. Issue the RPC to configure the node in the
urn:brocade.com:mgmt:brocade-interface namespace.
2. Under the node, include the node from the
urn:brocade.com:mgmt:brocade-xstp namespace.
3. Under the node, include the node element to access the MSTP mode
parameters.
For more details, refer to “Enabling STP, RSTP, MSTP, PVST, or Rapid PVST” on page 338.