Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 191)

Network OS NETCONF Operations Guide 159
53-1003231-02
Interface monitoring
12
c. Under the node element, include the following leaf elements:
sets the allotted amount of time since the previous reading. Polling
values are taken at different intervals depending on the configured time base.
specifies the high limit for the specified interface error type.
specifies the low limit for the specified interface error type.
specifies the value of an error on a configured interface that is in the buffer
range. The buffer value cannot exceed the average of the high and low threshold value.
d. The node element.
7. Under the node element, include the and node elements.
8. Under the node, include the following leaf elements to specify the actions to be taken
when a the error count rises above each threshold.
a. In the element, specify “email” to generate an e-mail message
when the high threshold is breached, “raslog” to generate a RASlog message, “fence” to
disable the port, “all” to perform all three actions, or “none” to do nothing.
Refer to the Network OS Administrator’s Guide for information about port fencing.
b. In the element, specify “email,” “raslog,” “all,” or “none.”
9. Under the node, specify the actions to be taken when the error count drops below
each threshold in the following leaf elements.
a. In the element, specify “email,” “raslog,” “all,” or “none.”
b. In the element, specify “email,” “raslog,” “all,” or “none.”
The following example disables a port and generates a RASlog message if IFG errors exceed 80
within a one-hour period.
xmlns="urn:brocade.com:mgmt:brocade-threshold-monitor">
custom
Ethernet
IFG
hour
80
10
10
fence raslog