Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 296)

264 Network OS NETCONF Operations Guide
53-1003231-02
Configuring a port-profile-port
19
tengigabitethernet
9/0/54
auto-for_iscsi
false
Configuring a port-profile-port
This section describes the tasks for configuring a port-profile-port on a physical interface.
Configure the port-profile-port on the physical interface.
To configure a port-profile-port assignment on an interface, issue the RPC to
configure the node in the urn:brocade.com:mgmt:brocade-interface namespace and
specify the following elements.
1. Under the node, specify the , ,
, , or element, depending on
the type of interface you want to work on.
2. Under the , , ,
, or element, use the element to specify
the interface for which you want to add the association with a port-profile.
3. Under the , , ,
, or element, specify the element
tag.
The following example configures the port-profile assignment from interface 1/0/1.
1/0/1