Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 383)

Network OS NETCONF Operations Guide 351
53-1003231-02
Spanning tree configuration and management
24
To enable interoperability with certain legacy Cisco switches, perform the following steps.
1. Issue the RPC to configure the node in the
urn:brocade.com:mgmt:brocade-interface namespace.
2. Under the node, include the node from the
urn:brocade.com:mgmt:brocade-xstp namespace.
3. Under the node, include the node element.
4. Under the node, include the element and specify “enable” to
enable interoperability with certain legacy Cisco switches.
enable
Disabling Cisco interoperability (MSTP)
If you no longer require the ability to interoperate with certain Cisco legacy switches, use this
procedure to deactivate this feature. By default, this ability is deactivated.
1. Issue the RPC to configure the node in the
urn:brocade.com:mgmt:brocade-interface namespace.
2. Under the node, include the node from the
urn:brocade.com:mgmt:brocade-xstp namespace.
3. Under the node, include the node element.
4. Under the node, include the element and specify “disable” to
disable interoperability with certain legacy Cisco switches.