Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 198)

166 Network OS NETCONF Operations Guide
53-1003231-02
Configuring vCenter
13
Immediately following first-time vCenter activation, Network OS starts the virtual asset discovery
process.
When the discovery process completes, the status displays as “Success.” Network OS has
performed all the necessary configurations needed for the vCenter Server. Network OS is now
ready for CDP transmissions from the virtual switches to identify which ESX/ESXi host is connected
to which physical interface in the Ethernet Fabric.
Step 4: Retrieving the discovered virtual assets
Use the RPC to retrieve the current configuration data and operational state data.
Refer to
“Retrieving configuration data” on page 11 and “Retrieving operational data” on page 15
for detailed instructions.