Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 315)

Network OS NETCONF Operations Guide 283
53-1003231-02
VLAN configuration and management
21
a. In the element, specify the interface port in [rbridge-id/]slot/port format.
b. In the element, include the delete operation in the opening tag to enable the
interface port.
c. Include the / elements to configure the interface as a layer 2 switch
port.
The following example configures 10-Gigabit Ethernet port 22/0/1 as a Layer 2 switch port.
1/0/1
trunk
4. To confirm the status of the DCB interface, issue the custom RPC from
the urn:brocade.com:mgmt:brocade-interface-ext namespace and include the following input
parameters.
a. In the element located in the urn:brocade.com:mgmt:brocade-interface
namespace, specify the type of interface, for example “Tengigabitethernet”.
b. In the element located in the urn:brocade.com:mgmt:brocade-interface
namespace, specify the interface name in the [rbridge-id/]slot/port format.
The following example returns status details about port 22/0/1.
TenGigabitEthernet
22/0/1
rpc-reply message-id="1908" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
TenGigabitEthernet
1/0/1