Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 435)

Network OS NETCONF Operations Guide 403
53-1003231-02
Configuring LLDP interface-level options
27
Deleting an LLDP profile
To delete an LLDP profile, perform the following steps.
1. Issue the RPC to configure the node in the
urn:brocade.com:mgmt:brocade-interface namespace.
2. Under the node, include the node element, which resides in the
urn:brocade.com:mgmt:brocade-lldp namespace.
3. Under the node, include the node element, and include the delete operation
in the element tag.
4. Under the node, include the element and set its value to the name of
the profile you want to delete.
The following example deletes an LLDP profile.
operation="delete">
UK_LLDP_IT
Configuring LLDP interface-level options
Only one LLDP profile can be assigned to an interface. If you do not configure the LLDP profile
options at the interface level, the global configuration is used on the interface. If there are no
global configuration values defined, the global default values are used.
To configure LLDP interface-level options, perform the following steps.