Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 121)

Network OS NETCONF Operations Guide 89
53-1003231-02
Fabric interface configuration management
8
4. Under the , , , or
node element, include the node element in the
urn:brocade.com:mgmt:brocade-fcoe namespace.
5. Under the node, include the node element.
6. Under the node element, include the empty element to
enable trunking on the ISL.
The following example enables trunking on 10-Gigabit Ethernet port 1/0/4.
1/0/4
Disabling a fabric trunk
Fabric trunking is enabled by default. Disable fabric trunking to revert the ISL back to a standalone
adjacency between two Brocade VCS Fabric switches.
The following example disables fabric trunking on port 1/0/4.
1/0/4
xmlns="urn:ietf:params:xml:ns:netconf:base:1.0"
operation="delete"/>