Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 503)

Network OS NETCONF Operations Guide 471
53-1003231-02
Configuring Auto-QOS
29
4. Set the DSCP value for all NAS traffic by entering a value for the node.
The Differentiated Services Code Point (DSCP) value affects how Auto-QoS operates by
specifying the priority value for Network Attached Storage traffic on IP networks. Higher
numbers provide a higher level of priority.
56
5. Identify the IPv4 network addresses (either origination or destination) used by the NAS devices
by adding the node, followed by either the node or the
node.
1.1.1.1/32
bruce