Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 341)

Network OS NETCONF Operations Guide 309
53-1003231-02
VXLAN configuration and management
22
4. (optional) Within the container, include the element to
change the reconnect interval between the NSX controller and the VCS fabric in case the
connection is lost. The default is 10 seconds, meaning that a reconnection is attempted every
10 seconds.
controller1
7
5. Within the container, include the element. The presence of this
element activates the NSX controller profile.
controller1
Displaying VXLAN information
Use the RPC to retrieve the current configuration data and operational state data from
the brocade-tunnels.YANG RPC module. Refer to
“Retrieving configuration data” on page 11 for
detailed instructions.