Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 573)

Network OS NETCONF Operations Guide 541
53-1003231-02
Configuring the track priority
35
Enabling preemption for a VE interface
To enable preemption for a VE interface, perform the following steps.
1. Issue the RPC to configure the node in the
urn:brocade.com:mgmt:brocade-interface namespace.
2. Under the node, include the / hierarchy of node elements,
3. Under the node, include the element, and specify the VE name.
4. Under the node, include the or node element located in the
urn:brocade.com:mgmt:brocade-vrrp namespace.
5. Under the or node, include the following leaf elements.
a. In the element, specify the group ID of the VRRP router group.
b. Include the empty element to enable preemption.
The following example enables preemption.
5
1
Configuring the track priority
The track priority is a priority that adjusts an Ethernet link interface when the physical uplink port
that it is tracking fails. In this way, a lower track priority can force a different router to take over as
master should the tracked uplink port fail.
For additional conceptual information about track ports and track priorities, refer to the Network
OS Administrator’s Guide.