Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 456)

424 Network OS NETCONF Operations Guide
53-1003231-02
Queueing
29
Configuring user-priority mappings
To configure user-priority mappings, perform the following steps.
1. Issue the RPC to configure the node in the
urn:brocade.com:mgmt:brocade-interface namespace.
2. Under the node, include the , ,
, , or node element.
3. Under the , , ,
, or node, include the element and set its
value to the name of the interface for which you want to configure user-priority mappings.
4. Under the , , ,
, or node, include the element located in the
urn:brocade.com:mgmt:brocade-qos namespace.
5. Under the node, to set the user-priority mapping, include the element,
and set its value to the desired priority.
6. Issue the RPC to save the running-config file to the startup-config file.
The following example sets the user priority mapping to 3 on 10-gigabit interface 22/0/2.
22/0/2
3
Creating a CoS-to-CoS mutation QoS map
To create a CoS-to-CoS mutation QoS map, perform the following steps.
1. Issue the RPC to configure the node in the
urn:brocade.com:mgmt:brocade-qos namespace.
2. Under the node, include the node element.
3. Under the node, include the node element.