Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 546)

514 Network OS NETCONF Operations Guide
53-1003231-02
Configuring static routes
33
Specifying the next hop gateway
To specify the next hop gateway, perform the following steps.
1. Issue the RPC to configure the node in the
urn:brocade.com:mgmt:brocade-rbridge namespace.
2. Under the node, include the leaf node, and specify the ID of the
routing bridge on which you want to configure static routes.
3. Under the node, include the ///
hierarchy of node elements.
The and subsequent nodes are located in the
urn:brocade.com:mgmt:brocade-rtm namespace.
4. Under the node, include the following leaf nodes.
a. In the element, specify the destination IP address.
b. In the element, specify the next hop IP address.
The following example configures a static route to 207.95.7.0, using 207.95.6.157 as the next-hop
gateway.
30
207.95.7.0/24
207.95.6.157
Specifying the egress interface
To configure a static IP route with a physical interface port or port-channel, perform the following
steps.