Carrier Access Access Navigator - Manual (Page 627)

Access Navigator - Release 1.8 August 2003 18-171
CLI Language Reference
CLI Command List
Status ISDN CRV
Purpose: Displays a message listing the status of the specified ISDN BRI channels. To display
the ISDN BRI channels, you must enter a CRV or range of CRVs.
NOTE: The status isdn crv command only applies to ISDN BRI
channels transported in the GR-303 4:1 TDM mode. Other ISDN BRI channels
transported using the 3DS0 mode are set up as digital crossconnections that
can be examined using the status ds0 command.
Security: Level 3 (monitor)
Syntax: status isdn crv
Example: status isdn crv 6
Example: status isdn crv 1-4
Message:
CRV Chan Status Call Status
--- ---- ------ -----------
1 B1 In Service Active
1 B2 In Service Active
1 D In Service n.a.
2 B1 In Service Idle
2 B2 In Service Idle
2 D In Service n.a.
3 B1 In Service Idle
3 B2 In Service Idle
3 D In Service n.a.
4 B1 User set Out of Service
4 B2 User set Out of Service
4 D User set Out of Service
Description:
Field Description
range Call Reference Value, 1 to 768, or a range of values such as 15-
18. Maximum range is 24 CRVs.
Item Description
CRV Call Reference Value, 1 to 768
Chan B1 – Bearer channel 1
B2 – Bearer channel 2
D – Signaling channel